Pulished on Feb. 06, 2025
I. Preparation before operation
1. Check the equipment: Make sure that the KRONE forage harvester and the Xinwanda XWD-475 forage harvester header are in good working condition, without damage or loose parts.
2. Read the instructions: Read the instructions for the KRONE forage harvester and the Xinwanda XWD-475 forage harvester corn header in detail, and be familiar with their respective functions and operation methods.
3. Safety preparation: Wear personal protective equipment, such as work clothes, safety helmets, protective glasses, etc.
4. Environmental inspection: Confirm that the working environment is safe, clear the hard objects such as stones and wires in the plot, ensure that the surface is flat, and the soil moisture content is appropriate.
II. Mounting operation
1. Start the KRONE forage harvester: Turn on the main power switch, start the hydraulic pump motor, and ensure that the forage harvester is in working condition.
2. Approach the corn header: Drive the forage harvester slowly to the vicinity of the Xinwanda XWD-475 silage corn header to ensure that the connection parts between the two are aligned.
3. Connect the hook device: According to the hook interface of the XWD-475 corn header and the forage harvester, use special tools or connectors to firmly connect the two. Pay attention to check the tightness of the connection parts to ensure that there is no looseness.
4. Adjust the corn header position: Use the hydraulic operating lever to adjust the position of the corn header to ensure that it can smoothly cut the silage corn and transmit it backward. During the adjustment process, pay attention to the distance between the header and the ground and the silage crops to avoid collision or damage.
III. Header operation
1. Start the corn header: start the engine and pay attention to the rotation direction and speed of the corn header to ensure its normal operation.
2. Corn header control: Control the lifting and moving forward and backward of the corn header through the operating handle or control lever. During the operation of the corn header, pay attention to the cutting of the silage crops and adjust the position and speed of the corn header in time.
3. Transport and chopping: The cut silage crops will enter the chopping device through the conveying device at the rear of the header for chopping. Pay attention to the operation of the chopping device to ensure good chopping effect.
IV. Precautions
1. Safe operation: During the entire operation process, be sure to comply with the safety operating procedures to ensure the safety of personnel and equipment.
2. Regular inspection: During the operation, the connection parts, fasteners and lubrication parts of the corn header and forage harvester should be checked regularly to ensure that there is no looseness or wear.
3. Adjust the speed: According to the growth of silage crops and the conditions of the plot, adjust the walking speed and cutting speed of the header and forage harvester in time to ensure the efficiency and quality of harvesting.
4. Cleaning and maintenance: After the operation, the residues and dust on the header and forage harvester should be cleaned in time, and necessary maintenance should be carried out.
Through the above steps and precautions, you can successfully complete the operation of the KRONE forage harvester to the Xinwanda XWD-475 corn header. I hope this operation guide can help you.
